|
LynxSwitch - L100
Series
Managed Industrial Ethernet Switch
The L100 LynxSwitch supports limited management and the switch
fulfils the toughest industrial environmental requirements. High
MTBF numbers makes the switch the choice for applications where
temperature, vibration and insulation are critical parameters.
Lynx switches are approved for industrial, marine, railway,
substation automation and defense use. Management of the L100
switches is easy and is done by the user in the Windows based IP
Configuration tool from OnTime. The IP configuration tool is free
and any of the Ethernet ports can be used for this purpose. Thus,
no serial port is required for setting the configuration parameter
on the L100 switch. This means that the L100 can be mounted and
installed prior to configuration. Excellent real time properties
are offered through both layer 2 and layer 3 priority support with
four priority queues and the switch is incorporated with a fault
contact in order to indicate any switch failures including user
configurable port alarms.
 |
IP
Configuration tool for configuration of:
o Port setting (auto-negotiation, HDX/FDX and 10/100 Mbps)
o Port alarm configuration.
Real time Ethernet:
o QoS based on layer 2 (IEEE802.1p) and layer 3 (IP ToS)
o Four priority queues
o Strict priority scheduling
o Head of Line blocking prevention for low priority packets
True industrial specification
o Full metal housing, IP40
o Wide temperature range (-40 to +70°C)
o Wide DC power range (19 to 60VDC)
o No moving parts or electrolytic capacitors
o Low power consumption (Typical 5W for no fiber version,
5,7W for one fiber transceiver and
6,4W for two fiber transceivers)
o Redundant power input with polarity protection
o Input Power Monitoring
o High MTBF numbers
o CE approved for industrial use
o DNV approved for marine use (optional)
Auto MDX/MDIX technology to ease switch connection
User configurable fault contact
35 mm DIN rail mounting
SNMP |
Lynx
models
The L100 series is available in different models approved for
different use:
Lynx 10x - Standard Industrial (default)
Lynx 11x - Marine
Lynx 12x - Rail
Lynx 13x - SA (includes a wider input power range - 110VDC)
Lynx 14x Defense (M12 connectors)
Port
combinations
The L100 series offers full flexibility regarding port
combinations. Copper (TX), Multi Mode (MM) fiber and/or Single
Mode (SM) fiber can be combined on the same switch. Standard
combinations are:
L1x6 6 ports 10/100Base TX
L1x7F1 1 port fiber, single- or multimode 100BASE and 6 ports
10/100Base TX
L1x8F2 2 ports fiber, single- or multimode 100BASE and 6
ports 10/100Base TX
Both single mode (SM) and multi mode (MM) fiber transceivers with
LC connectors are supported with a range from 2km to 120km.
Ordering
information
Technical Data
Downloads
Products;
Lynx -
T200
-
R200 -
U200 -
U100
|
