|
LynxSwitch type |
L106 L107F1-MM L108F2-MM L107F1-SM L108F2-SM |
|
Ports |
|
|
10/100Base T / TX Ports (RJ45)
Autonegotiation. Auto MDX/MDIX
Support long cable150m (Cat5e) |
6 |
6 |
6 |
6 |
6 |
|
100 FX Multimode ports (2km) |
|
1 (LC connector) |
2 (LC connector) |
|
|
|
100 FX Singlemode ports (15km)
(Options: 40 km and 85 km fiber) |
|
|
|
1 (LC connector) |
2 (LC connector) |
|
|
|
|
|
|
|
|
Power |
|
|
Input power
Transient protected |
19-60VDC redundant inputs with input voltage supervision |
|
Power consumption (Typ) |
5W 5,7W
6,4W 5,7W 6,4W |
|
Insulation |
1500Vrms
basic insulation according to EN60950 |
|
Physical dimensions |
(DIN
clip included) |
|
Dimensions |
H: 100mm W: 52,5mm (3 modules) D: 101mm (L300) D: 112mm
(L300F) |
|
Weight |
600
g |
|
Environmental |
|
|
Enclosure |
IP40 |
|
Temperature (storage) |
-40
- + 85° C |
|
Temperature (operational) |
-40
- + 70° C (40 and 85 km fiber may limit range) |
|
Humidity |
Humidity
5-95% RHD non-condensing (100% for coated version). |
|
Altitude |
2000
m |
|
EMC |
EN
61000-6-2 industrial immunity |
| |
EN
50081-2 industrial emission |
|
Vibration |
IEC
255-21-1 Class 1 |
| |
IEC
255-21-2 Class 1 |
|
Safety |
EN
60950 |
|
Maritime (on request) |
Type approval: Det Norske Veritas (Equivalent to
Germanischer Lloyd) |
|
Railroad |
Tested for Side Track and On Board use |
|
Type
approval: Det Norske Veritas (Equivalent to Germanischer
Lloyd) |
|
Railway (on request) |
Tested
for Side Track and On Board use |
|
Miscellaneous |
|
|
Fault contact |
Potential free electronic relay contact, glitch free
switching,
Current rating 120 mA continuous,
Voltage rating 60V
Isolation withstands 1500Vrms basic insulation according to EN
60950
Transient protected |
|
LED indications |
ON/FAIL LED indicates the unit’s operational mode (Green: OK/
Red: fail).
Port LEDs indicates green for link and flashing green for
activity. Port LEDs can also
indicate yellow for non-link condition on a port configured
for link monitoring (active
link expected).
Input voltage supervision LEDs (standard power supply)
indicates green for input
voltage within range and red for input voltage out of range. |
|
QoS (Quality of Service |
High-speed non blocking QoS switch fabric with 4 traffic
classes.1Mbit shared frame buffer. Both layer 2 (ref.
IEEE802.ip) and layer 3 (IP ToS) are
ported. |
