|
LynxSwitch - L400
Series
Managed Industrial Ethernet Switch
FRNT v0 - redundant ring with 20ms recovery time * SNMP * IGMP
snooping * VLAN
The L400 LynxSwitch supports full management including fast
network redundancy and the switch fulfills the toughest industrial
environmental requirements. High MTBF numbers makes the switch the
choice for applications where temperature, vibration and
insulation are critical parameters. The Lynx switches are approved
for industrial, marine, railway, substation automation and defense
use. The Fast Re-configuration of Networks Topology (FRNT) concept
of OnTime offers ultra fast re-configuration of the network
topology. The FRNT concept eliminates failures caused by network
links and/or switches. A redundant ring topology is an excellent
choice when high availability and fast re-configuring of the
network topology are a required. FRNT recovery time is as fast as
20ms. High multicast load is handled by the IGMP snooping feature
of the L400 switch. Management of the L400 switches is easy and is
done by the user in the Windows based IP Configuration tool from
OnTime or SNMP. The IP configuration tool is free and any of the
Ethernet ports can be used for this purpose. Thus, no serial port
is required for setting the configuration parameter on the L400
switch. This means that the L400 can be mounted and installed
prior to configuration. Excellent real time properties are offered
through both layer 2 and layer 3 priority support with four
priority queues and the switch is incorporated with a fault
contact in order to indicate any switch failures including user
configurable port alarms.
 |
FRNT v0
redundant ring
SNMP
IGMP snooping
VLAN
IP Configuration tool for configuration of:
o Port setting (auto-negotiation, HDX/FDXand 10/100 Mbps)
o Port alarm configuration.
Real time Ethernet:
o QoS based on layer 2 (IEEE802.1p) and layer 3 (IP ToS)
o Four priority queues
o Strict priority scheduling
o Head of Line blocking prevention for low priority packets
True industrial specification
o Full metal housing, IP40
o Wide temperature range (-40 to +70°C)
o Wide DC power range (19 to 60VDC)
o No moving parts or electrolytic capacitors
o Low power consumption (Typical 5W for no fiber version,
5,7W for one fiber transceiver and
6,4W for two fiber transceivers)
o Redundant power input with polarity protection
o Input Power Monitoring
o High MTBF numbers
o CE approved for industrial use
o DNV approved for marine use (optional)
Auto MDX/MDIX technology to ease switchconnection
User configurable fault contact
35 mm DIN rail mounting |
Lynx
Models
The L400 series is available in different models approved for
different use:
Lynx 40x - Standard Industrial (default)
Lynx 41x - Marine
Lynx 42x - Rail
Lynx 43x - SA (includes a wider input power range - 110VDC)
Lynx 44x Defense (M12 connectors)
Port
combinations
The L400 series offers full flexibility regarding port
combinations. Copper (TX), Multi Mode (MM) fiber and/or Single
Mode (SM) fiber can be combined on the same switch. Standard
combinations are:
L4x6 6 ports 10/100Base TX
L4x7F1 1 port fiber, single- or multimode 100BASE and 6
ports 10/100Base TX
L4x8F2 2 ports fiber, single- or multimode 100BASE and
6 ports 10/100Base TX
Both single mode (SM) and multi mode (MM) fiber transceivers with
LC connectors are supported with a range from 2km to 120km.
Ordering
information
Technical Data
Downloads |
